:
ATmega2560 processor with 256KB flash,
8KB SRAM and 6 timers
• Energy efficient 802.11g WLAN radio module
•
Power consumption for the whole module at
5V is only 460mW with active 500KbBit/s
data transfer
Over 60 free 5V I/O ports available on easy
to use standard 2.54mm grid connectors
MicroSD card slot for large flash memory
cards
2 Pushbuttons and 7 LEDs
• Module can also be used without the RP6V2
robot (see manual)
Use the RP6v2 RobotLoader Software
(included with the RP6v2) to program the
microcontroller via a wireless network
connection
Dedicated processor for TCP/IP Stack and
WPA2-AES encryption, easy to use via serial
port
Connects to accesspoint within 1 second
(typical), afterwards you can directly transfer
data
Innovative Training Solutions
Overview:
This very powerful expansion board
provides an ATmega2560 processor
plus WLAN for the RP6v2 Robot.
Compared to the controller on the
RP6 mainboard, this one features
twice as high the clock frequency
and 8 times as much SRAM and
Flash Memory.
As a bonus, on the RP6v2-WIFI you
will have a lot more free processing
time because the Motor Control,
ACS, IRCOMM, etc. can be handled
by the controller on the mainboard.
wireless network from a
PC
wirelessly to and from
the RP6v2 and a PC
microcontroller via
WLAN easily and
comfortably
Use it as a data logger
with the microSD card
Use it together with
several RP6v2-EXP
(experiment expansion
boards) to build your
own circuits
and Display
Comments to this Manuals